- Not exceed the max temperature 60℃(140°F ), ambient temperature + self heating.
- Vertical mounting and storage should keep the UP in the up direction.
- Mounting into a shaft should keep no eccentricity.
- Do not solder on the connector and terminal.
- Connect the connector on the terminal only a few times, losing connection will cause heating when apply electrical power.
- Vibration will cause service life shorter.
- The rotary connector can be mounted by the body or plastic collar, but it can not carry mechanical loads. Another end should be connected floating hold by electric wire.
- The uppers notice should be kept, otherwise, it will cause the rotary connector failure or shorten service life.
For small size and high precision of mercury slip ring, it is a very difficult problem of its installation. But how to install will be relatively correct and reasonable, firstly, fix the mercury slip ring to the one end of the rotation shaft. Next, it can be rotatable at both ends of the mercury slip ring, it can fix to each end. The most important thing is that must use the connecting terminal along with mercury slip ring we offered, which can guarantee longer life time, absolutely do not solder directly wire to the binding post of slip ring.